750 ml Green Ronseal Decking End Grain Preserve
- PREPARATION
Ensure all surfaces are clean, dry and free from dust, mildew, algae, oil deposits or other material which may interfere with the penetration of the preserver.
- APPLICATION AND DRY TIMES
Brush apply 1 litre of product per 3-4 square metres of cross-cut end grains of timber. Allow to dry before applying a second coat, usually 24 hours. Product appears blue in can but green when dry. Allow 3 days before overcoating with a suitable Ronseal Decking Product. 750ml will preserve and protect the end grains of even the largest decks.
- CLEAN UP
Remove as much product as possible from equipment before cleaning. Clean all equipment immediately after use with a detergent and water.
- KEY INFORMATION
Usage areas: All types of timber end grain.
Coverage: Approximately 3-4 metres squared per litre.
Dry Times: Recoat after 24 hours.
Number of coats: 2
Availability: In stock
WHAT IS RONSEAL DECKING END GRAIN PRESERVER?
End Grain is vulnerable to water ingress and attack by wood rotting fungi and wood destroying insects. Ronseal Decking End Grain Preserver is a deep, penetrating preserver specially formulated to protect existing previously supplied or freshly cut timber end grain. It's unique formulation completely preserves and protects even the most porous end grains.
WHY CHOOSE RONSEAL DECKING END GRAIN PRESERVER?
Ronseal Decking End Grain Preserver is a high performance preserver that is specially formulated to protect decking end grains from wood rotting fungi and wood destroying insects. It can be overcoated or stained with suitable Ronseal Decking Products and it is suitable for all types of hardwood and soft timber.
WHERE CAN IT BE USED?
Ronseal Decking End Grain Preserver is suitable for all types of hardwood and softwood decking timber, including pre-treated, pressure treated and preservative impregnated timber.
qty_per_card | N/A |
---|---|
barcode | N/A |
size | N/A |